12-21-98 sb98107 rev. a buss high voltage fuses hv 1000 - 10,000 volts series form no. hv series page 1 of 2 bif doc #6003 bussmann 13/32?and 13/16?x length (10.3mm and 20.6mm x length) for high voltage circuits non-time delay fuses for high voltage instruments and cir- cuits. physical size varies with electical rating of fuse to prevent over-fusing. use hva, hvb, hvj an d hvl for circuits up to 20kw dc or 30 kva ac. for higher interrupting capacity, use hvr, hvt, hvu, hvw and hvx. catalog symbol: hva, hvb, hvj, hvl, hvr, hvt, hvu, hvw, and hvx non-time delay 1000 to 10,000 volts hva (1000 volts) length *wt./100 amps dia. in. mm lbs. kg 1/16 3/4 1/8 1 1/4 1-1/2 1/10 2 0.41 3 76.1 2 0.91 2/10 3 3/10 4 3/8 6 1/2 10 hvb (2500 volts) 1/2 1-1/2 3/4 2 0.41 4.5 114.2 3 1.36 13 hvj (5000 volts) 1/16 1-1/2 1/8 2 1/4 4 0.81 5 126.9 9 4.08 1/2 6 3/4 10 1 hvl (10,000 volts) 1/16 1 1/8 1-1/2 1/4 2 0.81 10 253.8 15 6.80 1/2 3 hvr (1000 volts) (max. s.c. kva-500) 1/2 3 14 0.41 3 76.1 3 1.36 25 hvt (2500 volts) (max. s.c. kva-1250) 1/2 3 15 0.41 4.5 114.2 4 1.81 2 hvu (5000 volts) (max. s.c. kva-2500) 1/2 3 14 0.81 5 126.9 19 8.62 25 hvw (1200 volts) (max. s.c. kva-5000) 1/2 3 14 0.41 2.25 57.1 2 0.91 25 8 hvx (10,000 volts) (max. s.c. kva-12,000) 1/2 3 15 0.41 10.0 253.8 36 16.33 *shipping. carton quantity: 10. test spectifications catalog number load opening time hva hvb 110% 4 hours (min.) hvj 135% 1 hour (max.) hvl hvr hvt 100% 4 hours (min.) hvu 150% 1 hour (max.) hvw hvx } }
12-21-98 sb98107 rev. a buss high voltage fuses hv 1000 - 10,000 volts series bussmann form no. hv series page 2 of 2 bif doc #6003 the only controlled copy of this bif document is the electronic read-only version located on the bussmann network drive. all ot her copies of this bif document are by definition uncontrolled. this bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applicatio ns. bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. bussmann also reserves the right to change or update, withou t notice, any technical information contained in this bulletin. once a product has been select- ed, it should be tested by the user in all possible applications. catalog symbol: 4528, 4529, 4530, and 2960 fuse blocks for buss high voltage fuses (1000 to 10,000 volts) bakelite base. alloy plated terminals. *dimensions for bock inches/(mm s) fuse cat. base sym. no. a b c width hva 4528 3.75 1.125 0.38 1.0 hvr (95.3) (28.6) (9.5) (25.4) hvb 4529 5.25 1.125 0.38 1.0 hvt (133.4) (28.6) (9.5) (25.4) hvj 4530 6.5 1.66 0.5 1.38 hvu (165.1) (42.1) (12.7) (34.9) hvl 2960 11.44 1.45 0.75 1.38 hvx (290.5) (48.4) (19.1) (34.9) *two mounting holes: use #8 screws on blocks 4528 and 4529. use #10 screws on blocks 4530 and 2960. c a b dimensional data current in amperes time in seconds .02 .1 1 10 20 300 100 10 1 .1 .01 ampere rating 1/16 1/4 1/2 3/4 1 2 3 time-current characteristic curves?verage melt
|
